David J. Munk, Gareth A. Vio, Nicholas F. Giannelis, Jonathan E. Cooper

DOI Number: N/A

Conference number: IFASD-2017-139

Increasingly aircraft are being designed to be more environmentally friendly and fuel efficient, as defined by the 2020-Vision and Flight-Path EU initiatives. This entails a reduction in aircraft weight while still maintaining all the other constraints. The conventional, semi-monocoque, aircraft design has not changed for the past 50 years. Recently, developments in aircraft design has mainly come from the use of novel materials. A technique has recently been proposed, whereby topology optimisation is used, to determine the material distribution of simple flat plate wings for improved flutter characteristics. It was found that by modifying eigenmode shapes and separating the static natural frequencies the flutter velocity of the simple models could be improved. However, topology optimisation of continuum structures for dynamic stability is, thus far, limited to relatively small design problems. Therefore, this study has two aims. Firstly, it is to extend the method to representative aircraft wing structures and secondly to verify the theoretical results by experiment.

Read the full paper here

In Categories: 1. IFASD 2017, 1.Events, Experimental Methods in Structural Dynamics and Aeroelasticity
Email
Print
LinkedIn
The paper above was part of  proceedings of a CEAS event and as such the author has signed a publication agreement to have their paper published in the repository. In the case this paper is found somewhere else CEAS always links to the other source.  CEAS takes great care in making the correct content available to the reader. If any mistakes are found  in the listings please contact us directly at papers@aerospacerepository.org and we will correct the listing promptly.  CEAS cannot be held liable either for mistakes in editorial or technical aspects, nor for omissions, nor for the correctness of the content. In particular, CEAS does not guarantee completeness or correctness of information contained in external websites which can be accessed via links from CEAS’s websites. Despite accurate research on the content of such linked external websites, CEAS cannot be held liable for their content. Only the content providers of such external sites are liable for their content. Should you notice any mistake in technical or editorial aspects of the CEAS site, please do not hesitate to inform us.