Italo Ximenes, Felipe da Silva, Roberto da Silva, Mauricio Donadon

DOI Number: N/A

Conference number: IFASD-2024-070

Future aerial mobility will likely be powered by propeller propulsion, as it is more suitable for use in combination with electric motors. Therefore avoiding rotor instabilities be-
comes a major concern in the early project phases for the next generation of aircraft. Within this context, this work focuses on the application of Shape Memory Alloys (SMA) for Whirl Flutter (WF) suppression in propeller-driven aircraft. SMAs have a thermal-dependent modulus of elasticity, which allows the use of this class of materials to locally control the stiffness of the connections between the motor and the wing. For most of the flight, the mounting stiffness could be maintained at a minimum to better isolate the vibration coming from the motor, and only at high speeds it could be increased to avoid aeroelastic instabilities. To conduct the study, a 4 degree of freedom (dof) model of a wing section with an installed rotor was implemented and verified. This model combines a typical aeroelastic section, with springs associated with pitch and plunge dof, and the classical rotor model used in WF studies, which idealizes the rotor mounting by two torsion springs associated with pitch and yaw dof. Predictions obtained using the proposed model were compared with previous results from the literature. Following the model verification, the application of SMA was implemented by assuming that the connecting stiffness associated with the rotor installation is dependent on temperature, simulating an SMA-made mounting. Thus, it was possible to map the final flutter velocity of the system as a function of the temperatures associated with the rotor installation. The obtained results demonstrate that the flutter speed of the system may be significantly modified using this approach. They also indicate that the control of the SMA temperature shifts the dominant flutter mechanism from WF to the classical wing flutter, increasing even more the flutter speed of the system.

Read the full paper here

In Categories: 1. IFASD 2024, 1.Events, Rotorcraft Aeroelasticity
Email
Print
LinkedIn
The paper above was part of  proceedings of a CEAS event and as such the author has signed a publication agreement to have their paper published in the repository. In the case this paper is found somewhere else CEAS always links to the other source.  CEAS takes great care in making the correct content available to the reader. If any mistakes are found  in the listings please contact us directly at papers@aerospacerepository.org and we will correct the listing promptly.  CEAS cannot be held liable either for mistakes in editorial or technical aspects, nor for omissions, nor for the correctness of the content. In particular, CEAS does not guarantee completeness or correctness of information contained in external websites which can be accessed via links from CEAS’s websites. Despite accurate research on the content of such linked external websites, CEAS cannot be held liable for their content. Only the content providers of such external sites are liable for their content. Should you notice any mistake in technical or editorial aspects of the CEAS site, please do not hesitate to inform us.